105.538.583.433 (E205250100) | CONNECTING ROD

BRAND:

ACD was first established in 1960, she began to import Daihatsu Japan's diesel engine manufacturing technology in 1981 and has been producing "Anqing-Daihatsu" DK,DC,DE series marine diesel engines and generator sets. The company diesel engine products, covering a power range of 320KW~6600KW, are widely used in marine main engine, marine generator set, ocean engineering equipment, electric propulsion system, marine electrical power plant and stationary power station, etc.

The products can meet the standard requirement of various world classification societies, such as CCS,LR,ABS,NK,BV,DNV,GL, etc.More than 70% of the products are exported all over the world, and the customers are mainly distributed in Europe, Asia and America, with 30% of them from Hong Kong and China.  The products are used by some of the world's largest and most famous shipping companies such as NYK (Japan), CARDIFF(Greece), ANANGEL(Greece), TRANSMED(Greece), GRAIG (Briton), BENSHULT(Germany), OLDENDORFF (Germany), Eagle(America) as well as the domestic COSCO and China Shipping.

DESCRIPTION:

The connecting rod is of carbon steel die forging with the large end part being horizontal 3-division type.

FEATURE:

The item is strictly produced in accordance with Daihatsu Japan original technical standard and drawings. The performance of it is the same as Daihatsu Japan genuine part, and also, it is able to be exchanged with Daihatsu Japan genuine part.

CERTIFICATION:

Certified with BV certificate

PRECAUTIONS:

1.1.   Do not apply lubricating oil or grease to the rear surface of the shell. Inclusion of oil will cause the reduction of adhesion.

1.2.   Be sure to install the connecting rod large end part after matching the cylinder number, so that the embossed seat may be in the position directed toward the front side of the engine

1.3.   Since the bolt number is notched on the bolt, be minded to mount the bolt in the original position without fail, not mistaking the assembling position.

1.4.   If the tightening of bolt is insufficient, it will not only damage the bearing shell and large end part serration, but also incur serious accidents such as the breakage of bolt, and therefore be minded to securely tighten the bolt.

1.5.   Confirm that the discrimination numbers of the large end part and the small end part are identical.